A
Aki
Offline
na Mojtrg od 2019
Objavljeno:
nov 20 2021
12:41
Auto Dijagnistika VCDS HEX-V2 VAG COM 21.3 VAGCOM 20.12
EUR
Auto Dijagnistika VCDS HEX-V2 VAG COM 21.3 VAGCOM 20.12
2021 Really HEX-V2 VAG COM 21.3 VAGCOM 20.12.0 VCDS HEX V2 USB Interface FOR VW AUDI Skoda Seat Unlimited VINs
*****All cables we have tested before packing, but we can not guarantee it will work correctly with every buyer`s Computer Systems and Cars.
Features:
USB connection for compatibility with all modern laptops. Compatible with all diagnostic-capable VW/Audi passenger cars from 1996 to current; K, K+L, dual-K, or CAN.
Detachable USB cable. The supplied cable has a proprietary screw locking mechanism, but it can be replaced temporarily with a standard USB-A to USB-B (`printer`) cable should it become damaged.
Modern 32-bit micro-controller and fully updateable firmware.
Tri-Color (red/green/blue) status/activity LEDs with greatly improved visibility from almost any angle.
Includes an embedded license for VCDS and thus acts as a `dongle` for the software, allowing the software to be used and installed on any compatible PC.
Compatibility:
This interface works with all diagnostic-capable VW-Audi Group passenger cars from 1996 through current, except it does NOT fully support the following vehicles:
Routan vans -- All years. These are re-badged Chryslers and don`t use VW`s diagnostic protocols. and Lambohini
Computer Requirements:
We recommend at least a 1 GHz dual-core processor with 1 GB of RAM and Windows 7 or newer. Windows 8, 8.1, or 10 on a machine robust enough to support the respective operating system are also fine.
Extending this Interface:
The USB standards do not allow for passive extension cords!
Software:
The HEX-V2 should be used with the latest version of our VCDS software. The HEX-V2 does not have the ability to emulate a dumb serial pass-through interface and thus unlikely to be compatible with any software other than VCDS.
Driver Installation:
The HEX-V2 enumerates as an HID device and does not require a special driver. However, there are some HID power management quirks in 8.1 and newer fixed by installing a device-specific `driver` (actually just an INF file) supplied with the VCDS installer.
2021 Really HEX-V2 VAG COM 21.3 VAGCOM 20.12.0 VCDS HEX V2 USB Interface FOR VW AUDI Skoda Seat Unlimited VINs
*****All cables we have tested before packing, but we can not guarantee it will work correctly with every buyer`s Computer Systems and Cars.
Features:
USB connection for compatibility with all modern laptops. Compatible with all diagnostic-capable VW/Audi passenger cars from 1996 to current; K, K+L, dual-K, or CAN.
Detachable USB cable. The supplied cable has a proprietary screw locking mechanism, but it can be replaced temporarily with a standard USB-A to USB-B (`printer`) cable should it become damaged.
Modern 32-bit micro-controller and fully updateable firmware.
Tri-Color (red/green/blue) status/activity LEDs with greatly improved visibility from almost any angle.
Includes an embedded license for VCDS and thus acts as a `dongle` for the software, allowing the software to be used and installed on any compatible PC.
Compatibility:
This interface works with all diagnostic-capable VW-Audi Group passenger cars from 1996 through current, except it does NOT fully support the following vehicles:
Routan vans -- All years. These are re-badged Chryslers and don`t use VW`s diagnostic protocols. and Lambohini
Computer Requirements:
We recommend at least a 1 GHz dual-core processor with 1 GB of RAM and Windows 7 or newer. Windows 8, 8.1, or 10 on a machine robust enough to support the respective operating system are also fine.
Extending this Interface:
The USB standards do not allow for passive extension cords!
Software:
The HEX-V2 should be used with the latest version of our VCDS software. The HEX-V2 does not have the ability to emulate a dumb serial pass-through interface and thus unlikely to be compatible with any software other than VCDS.
Driver Installation:
The HEX-V2 enumerates as an HID device and does not require a special driver. However, there are some HID power management quirks in 8.1 and newer fixed by installing a device-specific `driver` (actually just an INF file) supplied with the VCDS installer.